Lindqvist -- a blog about Linux and Science. Mostly.

651. N/EDA in GAMESS. 3. Running L/CMOEDA

As it turns out, while MOEDA works fine with pure and hybrid functionals, it does not appear to like PCM, giving weird results.

Here's an example of a run that works, with a few key words highlighted:


!   File created by the GAMESS Input Deck Generator Plugin for Avogadro
 $BASIS EXTFIL=.TRUE. GBASIS=DEF2SVP $END
! $PCM SOLVNT=NEPTANE $END
! $PCMCAV RADII=SUAHF $END
 $CONTRL SCFTYP=RHF RUNTYP=EDA DFTTYP=PBE0 ICHARG=1 MULT=1 $END
 $CONTRL NOSYM=1 $END
 $SYSTEM MWORDS=2500 MEMDDI=500 $END
 $SCF DIRSCF=.TRUE. $END
 $lmoeda matom(1)=1,22 mcharg(1)=2,-1 mmult(1)=1,1 $end
 $DATA 
Test of MOEDA using a Mg coordination compound.
C1
Mg    12.0     3.14572     1.02487     1.29474
N     7.0     4.95329     0.37304     1.62652
N     7.0     3.11530     2.89665     1.82263
C     6.0     5.44265    -0.98008     1.41792
C     6.0     5.80308     1.30078     2.07039
C     6.0     1.96130     3.78017     1.78886
C     6.0     4.28661     3.37927     2.23846
C     6.0     5.48149     2.64462     2.33178
H     1.0     6.31935     3.22840     2.68338
C     6.0     4.36331     4.81950     2.64988
H     1.0     5.37500     5.09552     2.93515
H     1.0     3.70056     5.01438     3.49762
H     1.0     4.03950     5.47541     1.83769
C     6.0     7.22682     0.90313     2.32491
H     1.0     7.68811     0.50750     1.41630
H     1.0     7.27827     0.11050     3.07627
H     1.0     7.81805     1.74612     2.67254
H     1.0     5.81529    -1.43220     2.34182
H     1.0     4.63475    -1.61377     1.04987
H     1.0     6.24793    -1.02060     0.67837
H     1.0     1.72108     4.18678     2.77556
H     1.0     2.10316     4.62224     1.10460
H     1.0     1.08587     3.22835     1.44552
 $END

The ! comments out the PCM lines. I generated the input from an .xyz file through avogadro, and then edited the file manually to get the charges etc. right.

Here's the output:

DIRECT SCF CALCULATION, SCHWRZ=T FDIFF=F, DIRTHR= 0.00E+00 NITDIR=10
DFT IS SWITCHED OFF, PERFORMING PURE SCF UNTIL SWOFF THRESHOLD IS REACHED.

NONZERO BLOCKS
ITER EX DEM TOTAL ENERGY E CHANGE DENSITY CHANGE DIIS ERROR INTEGRALS SKIPPED
*** ERROR *** IN -DAWRIT- ROUTINE ON NODE 0
DAWRIT HAS REQUESTED A RECORD WITH LENGTH DIFFERENT THAN BEFORE - ABORT FORCED.
DAF RECORD 88 NEW LENGTH = 20100 OLD LENGTH = 190
EXECUTION OF GAMESS TERMINATED -ABNORMALLY- AT Thu Jun 14 23:30:05 2018
6712269 WORDS OF DYNAMIC MEMORY USED
CPU 0: STEP CPU TIME= 1.73 TOTAL CPU TIME= 2.0 ( 0.0 MIN)
TOTAL WALL CLOCK TIME= 2.1 SECONDS, CPU UTILIZATION IS 96.70%
DDI Process 0: error code 911
ddikick.x: application process 0 quit unexpectedly.
ddikick.x: Fatal error detected.
The error is most likely to be in the application, so check for
input errors, disk space, memory needs, application bugs, etc.
ddikick.x will now clean up all processes, and exit...
DDI Process 1: terminated upon request.
DDI Process 2: terminated upon request.
*** ERROR *** IN -DAWRIT- ROUTINE ON NODE 1
DAWRIT HAS REQUESTED A RECORD WITH LENGTH DIFFERENT THAN BEFORE - ABORT FORCED.
DAF RECORD 88 NEW LENGTH = 20100 OLD LENGTH = 190
*** ERROR *** IN -DAWRIT- ROUTINE ON NODE 2
DAWRIT HAS REQUESTED A RECORD WITH LENGTH DIFFERENT THAN BEFORE - ABORT FORCED.
DAF RECORD 88 NEW LENGTH = 20100 OLD LENGTH = 190
DDI Process 3: terminated upon request.
DDI Process 4: terminated upon request.
*** ERROR *** IN -DAWRIT- ROUTINE ON NODE 3
DAWRIT HAS REQUESTED A RECORD WITH LENGTH DIFFERENT THAN BEFORE - ABORT FORCED.
DAF RECORD 88 NEW LENGTH = 20100 OLD LENGTH = 190
DDI Process 5: terminated upon request.
*** ERROR *** IN -DAWRIT- ROUTINE ON NODE 4
DAWRIT HAS REQUESTED A RECORD WITH LENGTH DIFFERENT THAN BEFORE - ABORT FORCED.
DAF RECORD 88 NEW LENGTH = 20100 OLD LENGTH = 190
*** ERROR *** IN -DAWRIT- ROUTINE ON NODE 5
DAWRIT HAS REQUESTED A RECORD WITH LENGTH DIFFERENT THAN BEFORE - ABORT FORCED.
DAF RECORD 88 NEW LENGTH = 20100 OLD LENGTH = 190
ddikick.x: Sending kill signal to DDI processes.
ddikick.x: Execution terminated due to error(s).
unset echo

650. N/EDA in GAMESS. 2. Defining an external basis set

This is post number two in a series. Post 1 is here: http://verahill.blogspot.com/2018/06/649-neda-in-gamess-1-recompiling-gamess.html

Defining external basis sets isn't hard, but I find that the gamess documentation isn't great, and there isn't as much online as one would hope.

1. Either way, I'll create an external basis set file with def2svp and def2tzvp at /opt/gamess/gamess_nbo/EXTFILE.txt

2. Get the basis set definition from https://bse.pnl.gov/bse/portal -- select the atoms you want, and the basis set, set format to GAMESS US, and click Get Basis Set.

3. When you paste the data into the EXTFILE.txt,
a) skip the $DATA tag, and
b) change the atom definition to their corresponding symbols (e.g. H instead of Hydrogen) and append the name of the basis set,

so the beginning looks like this:


MG DEF2SVP
S   5
  1   4953.8339196             -0.57778967498E-02      
  2    745.18044154            -0.43124761082E-01      
  3    169.21604972            -0.19268216987    
  4     47.300672019           -0.48641439116    
  5     14.461336973           -0.42550894077    
S   3
  1     24.768174789            0.87956969984E-01      
  2      2.4940945349          -0.55165058128    
  3      0.87807584533         -0.53443294833    
S   1
  1      0.87212782497E-01            1.0000000        
S   1
  1      0.33599293780E-01            1.0000000        
P   5
  1     98.053010494           -0.14480564601E-01      
  2     22.586932277           -0.95495750787E-01      
  3      6.8391509842          -0.30787672651    
  4      2.2332843818          -0.49936292886    
  5      0.71606599387         -0.31503476213    
P   1
  1      0.18914796195          1.0000000        
P   1
  1      0.53768755187E-01            1.0000000        
D   1
  1      0.1010000              1.0000000 

H DEF2SVP
S   3
  1     13.0107010              0.19682158E-01   
  2      1.9622572              0.13796524       
  3      0.44453796             0.47831935       
S   1
  1      0.12194962             1.0000000        
P   1
  1      0.8000000              1.0000000        

C DEF2SVP

and the end like this:


D   1
  1      0.64500000             1.0000000        
F   1
  1      1.42800000             1.0000000        

MG DEF2TZVP
S   7
  1  31438.3495550              0.60912311326E-03      
  2   4715.5153354              0.47066196465E-02      
  3   1073.1629247              0.24135820657E-01      
  4    303.57238768             0.93628959834E-01      
  5     98.626251042            0.26646742093    
  6     34.943808417            0.47890929917    
  7     12.859785199            0.33698490286    
S   3
  1     64.876913004            0.19180889307E-01      
  2     19.725520777            0.90913704392E-01      
  3      2.8951804339          -0.39563756125    
S   2
  1      1.1960454710           1.6827603373     
  2      0.54329451156          0.52141091954    
S   1
  1      0.10099104092          1.0000000        
S   1
  1      0.36865728085E-01            1.0000000        
P   5
  1    179.87189612             0.53799549018E-02      
  2     42.120069376            0.39318014098E-01      
  3     13.120503032            0.15740129476    
  4      4.6257503609           0.35919094128    
  5      1.6695211016           0.45533379310    
P   1
  1      0.58551012105          1.0000000        
P   1
  1      0.18914796195          1.0000000        
P   1
  1      0.53768755187E-01            1.0000000        
D   1
  1      3.4440000              1.0000000        
D   1
  1      0.2900000              1.0000000        
D   1
  1      0.0700000              1.0000000

4. Edit the gms-files.csh in your gamess root (e.g. /opt/gamess/gamess_nbo)


setenv  EXTBAS /opt/gamess/gamess_nbo/EXTFILE.txt

5. To use, put


$BASIS EXTFIL=.TRUE. GBASIS=DEF2TZVP $END


$BASIS EXTFIL=.TRUE. GBASIS=DEF2SVP $END

in your gamess input file.

649. N/EDA in GAMESS. 1. Recompiling GAMESS US with NBO6

I need to do energy decomposition analysis (EDA), but only have licenses for Gaussian and NBO6 (i.e. not ADF, turbomole, QChem etc.). NEDA isn't supported by NBO6 with gaussian (afaik).

NWChem, my usual gaussian alternative, doesn't support NBO6 beyond writing a .47 file.

Enter GAMESS US. I've been trying out gamess every few years, but I've found that it's slow and unreliable (very difficult to get SCF convergence) for the systems I work with (polyanions). Some of this may obviously be down to my lack of familiarity with the code -- there are probably plenty of satisified users of GAMESS US.

Either way, NBO6 suppports NEDA with GAMESS US. Also, GAMESS US does two different types of EDA: the common Morokuma-Kitaura (MOROKM) one (although only with HF) and an alternative approach by Su and Li that's referred to by GAMESS as LMOEDA (or CMOEDA).

MOROKM and LMOEDA as supported out of the box by GAMESS, but to get it to do NEDA you need to re-link it against NBO. Luckily it's even easier than the instructions in the NBO gamess file (i.e. no need to edit code).

NOTE: I could only link with gfortran 4.9 (jessie). gfortran 6.3 (stretch) failed to link (messages re -fPIC; recompiling gamess with -fPIC didn't solve it).

To compile gamess, see e.g. http://verahill.blogspot.com/2013/06/4xx-gamess-us-2013-r1-on-debian-wheezy.html

Once you've done the ddi/comp and compall steps, edit lked and search for NBO. Change to


set NBO=true
set NBOLIB="/opt/nbo6/bin/gmsnbo.i8.a"

assuming that this location is correct.

Then do lked as in the post above.

Pages

15 June 2018

651. N/EDA in GAMESS. 3. Running L/CMOEDA

650. N/EDA in GAMESS. 2. Defining an external basis set

649. N/EDA in GAMESS. 1. Recompiling GAMESS US with NBO6

Contributors

Statcounter