They say that if you want to learn Debian, use Debian; if you want to learn CentOS, use CentOS, and if you want to learn linux, build LFS. I can't vouch for the last item (yet...), but I'd definitely agree with the first two statements. CentOS and Debian are just different enough that it takes a while before you find your way around CentOS if you're used to Debian.
Anyway, with the hope that this might be useful to someone in a similar situation:
Installation
The ROCKS installer is crap. There's no way around it.
Anyway, the first time you boot up from the CD or DVD you get this splash screen (this is from an earlier vbox installation):
You better type
build
quickly or you'll end up in a dead window.
There's an annoying question about the fully qualified domain name -- and it won't accept invalid FQDNs -- which will screw things up later if you want to change it. I'll leave that one as a challenge.
Assuming you typed build, and everything worked ok up to this point (how about a 'back' button?), you get to choose whether to partition manually or automatically -- with debian I always do it manually, because why not?
Well, with ROCKS it took me a number of tries before I got it right -- and if you get it wrong it crashes and YOU HAVE TO START OVER AGAIN. How about having a 'back' button and clearly displaying the minimum requirements in the gparted screen? To be fair, it's mentioned if you read the instructions on the rocksclusters.org website, but who'd do that?
Anyway, it seems that you need, at a minimum:
16GB : /
3.6 GB: /var
The rest of the disk > 4 GB : /state/partition1 OR /export/home
Either seems to work
Keep that in mind if you're making a virtual machine image -- you'll need a pretty darn big one.
Anyway, presuming that everything works out you'll finish the installation and you'll get to your first boot.
First boot:
There are a few things that I don't like about the default setup
Create your locate database
As root:
updatedb
Create a user
By default there's only root -- apart from preferring to gain superuser powers via sudo, we most definitely need to have normal users present too.
adduser verahill
passwd verahill
To log in immediately
su verahill
First time you log in it will create an RSA keypair -- you're asked to set passwords for the keys -- don't confuse that password with your user password (although it can be the same).
Oh, and change those ugly b/w terminal colours to e.g. fg #FCF2F2 and bg #0E0C56 (this is more a hint for my future self)
Give your user superuser powers:
As root
visudo
and add
verahill ALL=(ALL:ALL) ALL
That'll do the trick
/etc/fstab
fstab uses labels by default to keep track of partitions. I don't like labels, and I don't like relative paths, when you can use UUID.
LABEL=/ / ext3 defaults 1 1
LABEL=statepartition1 /state/partition1 ext3 defaults 1 2
LABEL=var /var ext3 defaults 1 2
LABEL=SWAP-sda3 swap swap defaults 0 0
and change to
UUID=779c8a5f-db6a-4433-a3e0-eaf4519e14b1 / ext3 defaults 1 1
UUID=82835cfc-8b86-40b3-9412-f908908714be /state/partition1 ext3 defaults 1 2
UUID=e286acd2-49cd-437b-bb1d-682faacb0628 /var ext3 defaults 1 2
To findout the UUIDs, do
ls /dev/disk/by-uuid/ -lah
and to map the relative paths to the labels do
ls /dev/disk/by-label/ -lah
/boot/grub/menu.lst
Again, a label tells grub where to find the root partition. No good. Change to UUID instead. Also, comment out hiddenmenu and change quiet to splash. It's grub '1', so you don't need to do update-grub or anything like that to make the changes take effect.
screen
sudo yum install screen
Just do the usual -- add the following to /etc/screenrc
multiuser onand
acladd verahill
sudo chmod +s /usr/bin/screen
sudo chmod 755 /var/run/screen
/etc/network/interfaces etc.
Well, they don't exist. Instead, you should go to /etc/sysconfig/network-scripts/
Each interface is configure by creating a file called ifcfg-ethX
You can set device specific routing using a file called route-ethX -- the route in the screen grab was to make sure that all traffic went via my gateway server.
Just look at the screen grab:
Oh, and it's not sudo service networking restart, it's sudo service network restart.
There's no /etc/hostname, instead it seems that you edit /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=roxy
Also, you edit /etc/hosts.local, not /etc/hosts
192.168.1.111 roxy(not easy coming up with names when you have 9 wired ifs in the same office)
192.168.2.111 foxy
I edited /etc/resolv.conf and added my DNS hosts directly -- so far, so good.
Enable ipv6
at the moment it seems that sinfo/d requires ipv6 to be enabled. And by default it isn't -- change your modprobe to this (i.e. comment out anything about ipv6)
alias eth0 r8169Yum
alias scsi_hostadapter sata_nv
alias net-pf-10 off
#alias ipv6 off
#options ipv6 disable=1
alias eth1 forcedeth
Compared to apt it's more yuck than yum, but each to their own.
It's pretty straightforward:
yum check-updates
yum install screen
yum erase screen
yum provides /screen
etc.
The repos seem to be defined in /etc/yum.conf
chkconfig
There's no rcconf or sysv-rc-conf, but there's chkconfig:
Typically you'd be in 3 or 5.
/opt
A lot of what you'll need for scientic endeavours is found in /opt IF YOU INSTALLED EVERYTHING FROM THE BEGINNING:
For some reason nothing's symlinked from /usr/lib and /usr/lib64, so be prepared to be doing a lot of that by hand (see my posts on build nwchem, sinfo and gromacs on centos/rocks)
/etc/profile
you might want to add
export PATH=$PATH:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin
A bit of a restart and you might have a usable system.
