Showing posts with label phasing. Show all posts
Showing posts with label phasing. Show all posts

19 December 2012

294. Bruker 1D processing using octave/matlab

I wanted a set of scripts that behaved a little bit like the commands in bruker xwin-nmr/topspin, so that I could do some quick processing for visual inspection without having to do too much coding.

I also wanted some simple modules that I can plug into automated processing routines for large numbers of spectra (e.g. when doing kinetics).

So here are a few simple octave routines which should work in matlab as well. They won't change the world, but should be good enough for some basic 1D processing.

Because of the groupdelay (GRPDLY) used in by Bruker (see e.g. here (16th of June post) and here), you need to use the bruk2ana converter. There's little science behind the values which are applied since they are hardware specific.



Example workflow:

./bin2ascii experiment_1/1 fid
getpar experiment_1/1 my.par

octave:1> [fid,pars]=loadfid('fid.ascii','my.par');
octave:2> [zfid,pars]=zf(fid,pars);
octave:3> [test,phc1]=bruk2ana(zfid,pars);
octave:4> test=em(test,0.5);
octave:5> plot(test(:,1),test(:,3));
octave:6> spectrum=ft(test,pars);
octave:7> phased=apk(spectrum,phc1);
octave:8> final=absd(spectrum);
octave:9> pltspec(final)




Linux shell-scripts

bin2ascii
#!/bin/bash
#bin2ascii dir fid
cp $1/$2 $1/$2.bak
ls $1/$2.bak | cpio -o | cpio -i --swap -u
od -An -t dI -v -w8 $1/$2.bak| gawk '{print NR,$1,$2}' > $2.ascii

getpars
 #!/bin/bash
 #getpars $1 $2
 # $1 is the location (directory or .) and $2 is the root of the output file name
 SW=`cat $1/acqus | grep 'SW_h' | sed 's/\=/\t/g' | gawk '{print $2}'| tr -d '\n'`
 TD=`cat $1/acqus | grep 'TD=' | sed 's/\=/\t/g' | gawk '{print $2}'| tr -d '\n'`
 O=`cat $1/acqus | grep '$O1=' | sed 's/\=/\t/g' | gawk '{print $2}'`
 SFO=`cat $1/acqus | grep 'SFO1=' | sed 's/\=/\t/g' | gawk '{print $2}'`
 DECIM=`cat $1/acqus | grep 'DECIM=' | sed 's/\=/\t/g' | gawk '{print $2}'`
 DSPFVS=`cat $1/acqus | grep 'DSPFVS=' | sed 's/\=/\t/g' | gawk '{print $2}'`
 echo $SW > $2
 echo $TD >> $2
 echo $O >> $2
 echo $SFO >> $2
 echo $DECIM >> $2
 echo $DSPFVS >> $2

Octave scripts

loadfid.m
function [fid,pars]=loadfid(infile,parfile)
%%Usage: [fid,pars]=loadfile(infile,parfile)
%%reads a pts, re, im ascii array 
%%generated by bin2ascii
%%and a parfile generated with genpar
 fid=load(infile);
 pars=load(parfile);
 t=linspace(0,(1/(pars(1)/(pars(2)/2))),pars(2)/2);
 fid=[t' fid(:,2) fid(:,3)];
end

zf.m
function [newfid,pars]=zf(fid,pars)
%% Usage:[newfid,updatedpars]=zf(fid,pars)
%% Doubles the number of points by zerofilling
 dims=size(fid);
 newfid=[fid' zeros(3,dims(1))]';
 pars(2)=pars(2)*2;
end

bruk2ana
function [fid,phc1]=bruk2ana(fid,pars)
%% Usage: [fid,phc1]=bruk2ana(fid,pars)
%% where phc1 is the first-order phase correction
%% Using https,//nmrglue.googlecode.com/svn-history/r44/trunk/nmrglue/fileio/bruker.py
%% and https,//ucdb.googlecode.com/hg/application/ProSpectND/html/dmx_digital_filters.html
%% The short version is: bruker fid data needs pre-processing and it's hardware dependent

%%D contains the digital filter parameters
D=[[10,2, 44.75];
[10,3, 33.5];
[10,4, 66.625];
[10,6, 59.083333333333333];
[10,8, 68.5625];
[10,12, 60.375];
[10,16, 69.53125];
[10,24, 61.020833333333333];
[10,32, 70.015625];
[10,48, 61.34375];
[10,64, 70.2578125];
[10,96, 61.505208333333333];
[10,128, 70.37890625];
[10,192, 61.5859375];
[10,256, 70.439453125];
[10,384, 61.626302083333333];
[10,512, 70.4697265625];
[10,768, 61.646484375];
[10,1024, 70.48486328125];
[10,1536, 61.656575520833333];
[10,2048,70.492431640625];
[11,2, 46.];
[11,3, 36.5];
[11,4, 48.];
[11,6, 50.166666666666667];
[11,8, 53.25];
[11,12, 69.5];
[11,16, 72.25];
[11,24, 70.166666666666667];
[11,32, 72.75];
[11,48, 70.5];
[11,64, 73.];
[11,96, 70.666666666666667];
[11,128, 72.5];
[11,192, 71.333333333333333];
[11,256, 72.25];
[11,384, 71.666666666666667];
[11,512, 72.125];
[11,768, 71.833333333333333];
[11,1024, 72.0625];
[11,1536, 71.916666666666667];
[11,2048, 72.03125];
[12,2, 46. ];
[12,3, 36.5];
[12,4, 48.];
[12,6, 50.166666666666667];
[12,8, 53.25];
[12,12, 69.5];
[12,16, 71.625];
[12,24, 70.166666666666667];
[12,32, 72.125];
[12,48, 70.5];
[12,64, 72.375];
[12,96, 70.666666666666667];
[12,128, 72.5];
[12,192, 71.333333333333333];
[12,256, 72.25];
[12,384, 71.666666666666667];
[12,512, 72.125];
[12,768, 71.833333333333333];
[12,1024, 72.0625];
[12,1536, 71.916666666666667];
[12,2048, 72.03125];
[13,2, 2.75]; 
[13,3, 2.8333333333333333];
[13,4, 2.875];
[13,6, 2.9166666666666667];
[13,8, 2.9375];
[13,12, 2.9583333333333333];
[13,16, 2.96875];
[13,24, 2.9791666666666667];
[13,32, 2.984375];
[13,48, 2.9895833333333333];
[13,64, 2.9921875];
[13,96, 2.9947916666666667];];

 h=find(D(:,2)==pars(5));
 j=find(D(h,1)==pars(6));
 magickey=D(h(j),3);
 chop=floor(magickey);

 phc1=(magickey-chop)*2*pi; %the first-order phase correction gets mangled by bruker

 tmp=size(fid); %matlab workaround. rows/columns would be more elegant
 
 newfid=[fid(chop:tmp(1),2:3)' fid(1:chop-1,2:3)']';
 fid=[fid(:,1) newfid(:,1) newfid(:,2)];
 
end

em.m
function fid=em(fid,lb)
%%Usage: fid=em(fid,lb)
%%Exponential multiplication window function
%%Increases Signal-to-noise at the expense
%%of resolution
 fid(:,2)=fid(:,2).*exp(-lb.*fid(:,1));
 fid(:,3)=fid(:,3).*exp(-lb.*fid(:,1));
end

gm.m
function fid=gm(fid,lb)
%%Usage: fid=gm(fid,lb)
%%Gaussian multiplication window function
%%Increases Signal-to-noise at the expense
%%of resolution
 fid(:,2)=fid(:,2).*exp(-(lb.*fid(:,1)).^2);
 fid(:,3)=fid(:,3).*exp(-(lb.*fid(:,1)).^2);
end

de.m
function fid=de(fid,lb,gm)
%%Usage fid=de(fid,lb,gm)
%%Double-exponential window function
%%Increases resolution at the expense of
%%signal-to-noise
 at=max(fid(:,1));
 defun= @(lb,gm,t) (exp(-(t.*lb-gm*at))).^2;
 fid(:,2)=fid(:,2).*defun(lb,gm,fid(:,1));
 fid(:,3)=fid(:,3).*defun(lb,gm,fid(:,1));
end

traf.m
function fid=traf(fid,lb)
%%Usage: fid=traf(fid,lb)
%%TRAF window function
%%Increases resolution at the expense of
%%the signal-to-noise
 at=max(fid(:,1));
 traffun= @(lb,t) (exp(-t.*lb)).^2./((exp(-t.*lb)).^3+(exp(-at*lb)).^3);
 fid(:,2)=fid(:,2).*traffun(lb,fid(:,1));
 fid(:,3)=fid(:,3).*traffun(lb,fid(:,1));
end

ft.m
function spectrum=ft(fid,pars)
%%Usage: spectrum=ft(fid,pars)
%% Spectrum is a complex array with the frequency in
%%the first column and the real and imaginary parts
%%in the second column
%%pars(3)=centrefreq, pars(1)=SW
 spectrum=fftshift(fft(fid(:,3)+i*fid(:,2)));
 tmp=size(spectrum);%matlab workaround
 freq=linspace(pars(3)+pars(1)/2,pars(3)-pars(1)/2,tmp(1));
 spectrum=[freq' spectrum];
endfunction

apk.m
function spectrum=apk(spectrum,phc1)
%%Usage spectrum=apk(spectrum,phc1)
%%Spectrum is a complex matrix with
%%the frequency in the first column
%%and the complex spectrum in the 
%%second column. phc1 is the first order
%%phase correection

 tmp=size(spectrum);
 m=720;
 ph=linspace(-2*pi,2*pi,m);
 maxsig=0;k=1;
 minsig=-inf;
 for n=1:m;
  spex=real( (spectrum(:,2)).*exp(i*(ph(n)+phc1*i/tmp(1))) );
  localmin=min(spex);
        localmax=max(spex);
        if (localmin>minsig) 
                minsig=localmin;
                k=n;
        end
 end
 ph0=ph(k);
 spectrum(:,2)=spectrum(:,2).*exp(i*(ph0+phc1*i/tmp(1)));
end

altapk.m
function [spectrum,ph]=altapk(spectrum,phc0,phc1)
%%Usage -spectrum,ph]=altapk(spectrum,phc0,phc1)
%%Spectrum is a complex matrix with the frequency in the first column
%%and the complex spectrum in the second column. phc0 and phc1 are the first order
%%phase correction parameters, respectively, and are used as initial guesses.
%%This is an implementation of Chen, Weng, Goh and Garland, J. Mag. Res., 2002, 158, 164-168 and depends on entropy.m.

    ph=[phc0;phc1];
        ph=minimize("entropy",{ph,spectrum});

        %compute spectrum with optimal phase params
        pts=linspace(1,size(spectrum(:,2),1),size(spectrum(:,2),1));
        phi=(ph(1)+ph(2).*pts./max(pts))';
        spectrum(:,2)=spectrum(:,2).*exp(i*phi);
end

entropy.m
function E=entropy(ph,spectrum)
%%Used by altapk.m
    pts=linspace(1,size(spectrum(:,2),1),size(spectrum(:,2),1));
        penalty=5.53;

    phi=(ph(1)+ph(2).*pts./max(pts))';
        size(phi);
        spectrum(:,2)=spectrum(:,2).*exp(i*phi);
        R=real(spectrum(:,2));
        size(R);
    Rm=firstderiv(R);
        size(Rm);
    h=abs(Rm)/sum(abs(Rm));
        size(h);

        negs= imag((R).^(1/2));
        negs(find(negs>1))=1;
    P= @(R) penalty.*sum((negs).*R.^2);

    E=-sum(h.*log(h))+P(R);
end

absd.m
function spectrum=absd(spectrum)
%%Usage spectrum=absd(spectrum)
%%Simple (linear) baseline correction
        bsline=@(m) sum(abs(real(spectrum(:,2))-m));
        guess=0;
        p=0;
        newm=minimize(bsline,p);
        spectrum(:,2)=spectrum(:,2)-newm;
end

pltspec.m
function pltspec(spectrum)
%%Usage: pltspec(spectrum)
%%Where spectrum is a complex matrix
%%with the frequency in the first column
%%and the complex spectrum (a+i*b) in the
%%second column
 plot(spectrum(:,1),real(spectrum(:,2)))
end